Cam specifications

Post whatever you like in here but try to keep it Honda City related!
Mark_Moddy
Forum Regular
Posts: 73
Joined: Sun Feb 01, 2004 12:53 pm
Location: Brisbane, Australia

Cam specifications

Postby Mark_Moddy » Mon Feb 11, 2008 11:30 am

Hello

Does anyone have the cam specifications for :

1. Standard NA city
2. City T1
3. City T2

The specs for the T2r are already posted.

Thanks

Mark

User avatar
James
Moderator / Donating Member
Posts: 3092
Joined: Wed Apr 09, 2003 1:59 pm
Location: Putaruru
Contact:

Postby James » Mon Feb 11, 2008 1:21 pm

They are in the Manuals. If you dig them out it would be good if you posted them up here.


http://www.cityturbo.com/manuals/24_60PD100/06/09.html

Shows lobe sizes for a T1, cant see anything different for a T2 so might be the same.

http://www.cityturbo.com/manuals/02_60SA700/06/09.html

N/A City.

Just measure the base circle diameter on a standard cam and subtract from those measurements to get peak lifts. There are specs on the timings around somewhere but Im not sure where, you can inference them from the Mugen Cam specs in the infobase.

Are you getting a grind done? Its something I have been thinking about recently as its going to be very important to my high HP build.

Interesting that the Turbo has slightly more CVCC valve lift as well as main valve lift.

User avatar
James
Moderator / Donating Member
Posts: 3092
Joined: Wed Apr 09, 2003 1:59 pm
Location: Putaruru
Contact:

Postby James » Sat Feb 16, 2008 5:36 pm

Ah ha, found the cam timings,

http://www.cityturbo.com/manuals/43_60PD120/01/04.html

about half way down that page :)

si
Donating Member
Posts: 167
Joined: Wed Feb 12, 2003 12:36 pm
Location: Brisbane

Postby si » Sun Feb 17, 2008 6:43 pm

You can also find the standard cam specs on the Tighe Cams site. I might be selling my cam which has a 946 grind on it if you are after one.


Return to “General”

Who is online

Users browsing this forum: No registered users and 38 guests