They are in the Manuals. If you dig them out it would be good if you posted them up here.
http://www.cityturbo.com/manuals/24_60PD100/06/09.htmlShows lobe sizes for a T1, cant see anything different for a T2 so might be the same.
http://www.cityturbo.com/manuals/02_60SA700/06/09.htmlN/A City.
Just measure the base circle diameter on a standard cam and subtract from those measurements to get peak lifts. There are specs on the timings around somewhere but Im not sure where, you can inference them from the Mugen Cam specs in the infobase.
Are you getting a grind done? Its something I have been thinking about recently as its going to be very important to my high HP build.
Interesting that the Turbo has slightly more CVCC valve lift as well as main valve lift.