Hi has anyone come up with alternative suspension systems for these yet?
The genuine Honda ones are so dear.
any revised suspension for T1/ T2's
-
- Forum Enthusiast
- Posts: 270
- Joined: Tue Jan 20, 2004 8:47 am
- Location: Dunedin
- James
- Moderator / Donating Member
- Posts: 3092
- Joined: Wed Apr 09, 2003 1:59 pm
- Location: Putaruru
- Contact:
There are a number of solutions that could probably be found and several I have alluded to in the past. It just requires someone to have some decent access to old honda parts and to do some research. I dont have a city so there isn't a lot I can do. The fact my car is using the rear struts from a 79 EB3, front struts from a VW golf and front knuckes from a prelude shows just how interchangable it all is.
-
- Forum Regular
- Posts: 73
- Joined: Sun Feb 01, 2004 12:53 pm
- Location: Brisbane, Australia
Suspension
Any good suspension place should be able to help you out.
I have both Koni and Bilsteins.
Try Quadrant, or Fulcrum.
The head office of Pedders in Melbourne could possiibly help you with some of their custom setups.
Or Leda Suspension in Brisbane (Bruce Dazel).
I recommend Bilsteins.
Make sure you get adjustable spring platforms for the front. At the same time replace all the rubber brake hoses with braided ones.
Cheers
MM
I have both Koni and Bilsteins.
Try Quadrant, or Fulcrum.
The head office of Pedders in Melbourne could possiibly help you with some of their custom setups.
Or Leda Suspension in Brisbane (Bruce Dazel).
I recommend Bilsteins.
Make sure you get adjustable spring platforms for the front. At the same time replace all the rubber brake hoses with braided ones.
Cheers
MM
-
- Forum Enthusiast
- Posts: 270
- Joined: Tue Jan 20, 2004 8:47 am
- Location: Dunedin
rear shocks
samol wrote:I need the rear shocks replaced on mine for a wof too they are both leaking
try civic auto for some used ones that are 'dry'...
-
- Forum Enthusiast
- Posts: 270
- Joined: Tue Jan 20, 2004 8:47 am
- Location: Dunedin
Re: Suspension
many thanks Mark
Mark_Moddy wrote:Any good suspension place should be able to help you out.
I have both Koni and Bilsteins.
Try Quadrant, or Fulcrum.
The head office of Pedders in Melbourne could possiibly help you with some of their custom setups.
Or Leda Suspension in Brisbane (Bruce Dazel).
I recommend Bilsteins.
Make sure you get adjustable spring platforms for the front. At the same time replace all the rubber brake hoses with braided ones.
Cheers
MM
Who is online
Users browsing this forum: No registered users and 17 guests