CityTurbo.com

There isn't an English one, check the Info Database

See there is a T11 on Ebay, located Sydney, buy now price of $1000. Could be a bit rough but not bad value.

Hey Bigelboe, you're better looking than I imagined!!!

So where is it going to live?

You talking front or rear?

Yes, it was one of the City bikes, almost brand new, was on for 10 days, started at $200 and worked it's way up to $680 and sat there for 4 or 5 days. At 7pm it was $710 but sold just after 8 for $1925. A bit out of my league, just hope some 10 year old isn't riding it around a paddock. It didn't so...

OK, which member just bought the Motocompo on Ebay?

Matt, the bearing itself will have the manufacturers name and his part No on it and any good bearing shop should be able to match it with a suitable replacement. I've never changed one but you will probably need access to a press.

Ben I'm just supprised that he can't locate any when these other people don't seem to be having a problem. The original Honda ones come in about 5 different tolerances to allow for variations in crank journal sizes due to wear, that is why used ones are not a good idea, in fact I doubt that a good m...

Civic, fitting second hand bearings is not a good idea, I had my motor rebuilt at John Moyle's just off Main Nth Rd. They didn't have any problem getting bearings and I know of another that was rebuilt at City Dismantlers. Repco and Southcotts also do rebuilds, you could probably find a catalogue on...

The ER engine was used in other Honda models, Civic and City Pro, should be available from Honda or any engine rebuilding shop should also be able to source them.

I like the side-skirts, any chance of a close up of those? The car looks a bit like a City Turbo mounted to an intercooler, shure that's big enough.

And don't forget to turn your boost down and have a safe one.

I had a problem with light switching although not the same as yours, it was the grease/lubricant which was used in the light switch stalk when it was originally assembled and after 23 years had dried out enough to stop the contacts from connecting, if you do pull it apart be mindfull that there are ...

Paul, may have mislead you, timing should still be done to the advance mark, 28deg, but if your dizzy is half a turn out it it because you have not set it to TDC (or+28) on No 1 cyl, please re-read my earlier post.