CityTurbo.com

Hey does any one know of any adjustable cam gears that will work with T2 engine. The one off my D13B vtec looks close but close isnt good enough needs to be perfect.

Thanks

May have to get the engine+gearbox off you. Will give you a PM at the end of the week when Iv had to time see whos going up to Auckland next.

Filled car up today then broke down 100m down the road so got towed home. Taking the fuel line off and turning the ignition on theres only a very slow drip of fuel and the pump is making a higher pitch sound the normal like its not picking any fuel up. I suspect that the fuels dirty and have stuffed...

where you located?

Was just about to take front bumper off to paint it a colour the matches the car. Had a look at how its mounted and it has 1 bolt in the middle then on the side its looks like you need to remove the guard to get it off. Is the correct or is there a easyer way to remove it. Didnt want to just rush in...

spacers for the rear would be a good idea.



only half a finger clearance.

Can confirm the volks fit. +37 offset 195/50/15 But will be getting smaller tires at some stage since the ones are quite bald. http://c.imagehost.org/0595/Pic_0120_097.jpg http://a.imagehost.org/0662/Pic_0120_093.jpg http://a.imagehost.org/0389/Pic_0120_094.jpg http://c.imagehost.org/0748/Pic_0120_0...

Doesnt sound normal altho I dont have a heater in mine. By the sounds of it the air for those vents isnt passing though the heater core. Had the same problem on other cars and its turned out to be the heater core was so caked in dirt/dust the air went around it instead of though it so it would only ...

sold

The volks are +37 offset ill have to ask the original owner of the 15s that are on it now what offset they are.

Iv got 15's on my T2
185/50/15
This about 40mm gap between the shock and the tires. Unsure of the width of the rim since its not mine but looks to be 6inch.

And iv got some volk 15inch superfine rims ill be sticking on when I can afford some decent tires. 15X6.5 so may need to get some 9mm spacers.

First off does any one know how much pressure the stock fuel reg can handle? Aiming for 160hp if I get more ill be happy. But looks like ill be needing 17-18 psi (which will need a increased fuel pressure of 70-80psi to prevent leaning) Iv already got a big front mount inter-cooler so the extra heat...

Post up when you hear back from Phantom Grip, im looking for one myself.

Looks good.

I got a second hand one from 3GCVC so should be sorted now for WOF re-re-check lol.