CityTurbo.com

i have one if you need another,cant use it in mt mini as the bonnet wont shut,so just ruing a t1 inlet.

more than likely your hitting the fuel cut,if you have altered the boost from std to 15+psi then thats your problem,other thing is wastegate may not be operateing properly check this also as it will over boost and hit fuel cut as well.

hi,look in the infobase (on the front/mainpage,scroll down to fuses,heater wiring/ac ect should be all the same weather or not its turbo/na

yeah i have a pic of it ill have to send ya it catchs all the colours,theres about 7 all up quite cool to watch go down the road tho,suits the mini with all its round bits,i think i suits it as where you see people painting there lancers wrx ect just dont look right,theres a toyoya previa people mov...

hi all,heres a vid of my mini with t2 engine,this is before it blew it's headgasket then when i did that it blew the bottom end,(was a ex farm basher)so i rebuilt it from top to bottom and it went like a rocket till a piston let go!!!!,im in the prosess of replacing the damaged piston and should hav...

ill be going to pick a part on friday so if you want ill grab one if theres any there.

cheers pete.

yea just snip and tee it i just had a look at mini and its running of 2 so thats the one on the outer side of the dizzy.

cheers pete.

hi,go off either 5 or 2 the two lines comeing off the dizzy,if you go for 31,32lines these will only tell you what the turbo is boosting,if you go for one in the inlet manifold ie 2-5 this will tell you exactly how much pressure/psi the engine is getting example my mini was boosting 12psi at turbo b...

hi if you need a map unit i have one here if you dont have a spare :) the fan,take it out or disconnect it from the loom and you can either try in car of remove it and wire it to the battery to see if the fan will run if it doesnt its buggerd,again i think i have a spart that wotks,if it does go the...

hi,yes as long as you tell them it for the city turbo,i got one last week

ill only answer what i know :) 100psi on all four cly? did you do this with throttle open whilst cranking it over on the starter? it should be 135psi over all four at 300rpm (starter speed) (this is in infobase) :) i just had my engine recond last week as you can see in my post,did a simler thing tw...

hi all,well the reason ihavent been on here much is the worst case happend to me,did the whole conversion,repainted the car ready for its cert the bang the engine let go,i did compresson check on it and was barely 50psi on 1-4,and 2-3 were approx 100psi,sostriped it down and sent to reconditioners,b...

hi,i dont think so as the turbo citys have bigger radaitors than the na version,the fand between the t1-t2 are the same tho i have both here if you need one.

if you want to see how much they flex jack up the car from the front and open up the doors and see how far out in relaton to the catch even most cars with roof doors /body can felx upto 2-3mm just mesure from the center of the lock/catch on the door then down to the center of the catch on the body.

i'd fix the realy wires 1st before anything,these carry the main power output to the likes of the coil ecu dizzy among other things,its even possible that if your wiring/realy is dodgey it could well have done more damage now than what was before,ie fryed dizzy ect,repair the wiring/realy then see i...