Torque Settings

Every bit of information we have about the Honda City compiled by our members!
User avatar
JohnT
Donating Member
Posts: 177
Joined: Sat Aug 10, 2002 6:16 pm
Location: Adelaide South Australia

Torque Settings

Postby JohnT » Mon Jan 19, 2004 8:06 pm

Bolt / Nut                                         lb / ft                            Kg / m
Main bearing                                      29.0                                        4.0
Crank Pulley                                       80.0                             11.0
CVCC Valve Collar   51. - 61.            7.5 - 8.5
Con Rod Big end     20.0                      2.8
Flywheel                                                                           36.0                                        5.0
Cylinder Head                      37. - 42.           5.1 - 5.9
Manifold studs           14. - 17.          2.3
Oil Pump                                                                           7. - 10.                                1. - 1.4
Rocker - small                      10.0                       1.4
Rocker - large                       17.0                       2.4
Water Pump                                     10.0                       1.4
Tappet cover nut torque        0.8 - 1.2 kg/m (Thanks Colza)

Data provided to us by Charles of Racecraft. Note that use of special head studs or big end bolts may allow higher torque settings.

John

Colza
Forum Addict
Posts: 1744
Joined: Wed Apr 09, 2003 6:10 am
Location: Upper Hutt

Re: Torque Settings

Postby Colza » Tue Feb 22, 2005 12:56 pm

Tappet cover nut torque        0.8 - 1.2 kg/m.

From a post by Henry.


Return to “The Honda City InfoBase”

Who is online

Users browsing this forum: No registered users and 8 guests