I know the Quaife QDF3U can be made to fit.
The Quaife site is being 'rebuilt' so I would like to know if the QDF4U could also be made to fit in to a T2 gearbox.
Both have 35mm bearings.
I have found the technical drawing for the QDF4U, does anyone have the technical drawing for the QDF3U so I can compair measurements?
Quaife LSD Diffs
- James
- Moderator / Donating Member
- Posts: 3092
- Joined: Wed Apr 09, 2003 1:59 pm
- Location: Putaruru
- Contact:
Couldn't find anything, trawled some net archives too. Probably the best bet is to email quaife, or have a look at my dimensions of the t2 diff in here http://cityturbo.com/forums/viewtopic.p ... 22&start=0
-
- Donating Member
- Posts: 120
- Joined: Sat Feb 28, 2009 5:24 pm
- Location: perth western australia
quaife lsd
Hi I have a quaife lsd in a t2 box ,it was the same as gingernuts and ?turbocab got in 07.My car is in the final stages of being started this week.We have problems with the old immobilizer and anothr and some other mystery piece of gear on the fuel side which looks like an oxy acetalene guage.will post up when we get it to run.I did post earlier about fitting the diff in
Who is online
Users browsing this forum: No registered users and 94 guests