camtech
-
- Forum Addict
- Posts: 589
- Joined: Tue Jan 07, 2003 9:57 pm
- Location: Manly West, Brisbane, Queensland
Re: camtech
2 minutes on whitepages.com.au SEARCH SEARCH SEARCH!!!
------
Camtech Australia Pty Ltd
(Camshaft Sales) Unit 15/ 20 Alfred Rd
Chipping Norton 2170 (02) 9755 3101
Fax (02) 9755 3144
-------
Camtech Solutions
U 1/ 21 Watland St Springwood 4127
(07) 3209 4888
-Now Im not sayin geither of these is correct place or even correct business. but holy sh@@ , just search white pages or something.
------
Camtech Australia Pty Ltd
(Camshaft Sales) Unit 15/ 20 Alfred Rd
Chipping Norton 2170 (02) 9755 3101
Fax (02) 9755 3144
-------
Camtech Solutions
U 1/ 21 Watland St Springwood 4127
(07) 3209 4888
-Now Im not sayin geither of these is correct place or even correct business. but holy sh@@ , just search white pages or something.
Re: camtech
![Image](http://www.whitepages.com.au/wp/images/logo_topNav.gif)
is it really THAT hard?!
Re: camtech
Flaming the hell out of someone who has done something a little silly is NOT what we generally do on this forum. Smithy pointed out the error in his ways, and unless he does it again, there it stays. Give him a break guys.
-
- Moderator / Donating Member
- Posts: 1217
- Joined: Sat Feb 21, 2004 9:31 am
- Location: Christchurch, New Zealand
Re: camtech
Totaly agree Colza. Welcome to the site Jay
-
- Forum Addict
- Posts: 589
- Joined: Tue Jan 07, 2003 9:57 pm
- Location: Manly West, Brisbane, Queensland
Re: camtech
So Jay did you get anyway with those....
im not even sure either are of the correct Cam type...
as theres business logistics type international company called CamTech too so thats not a help..hahaha..
lets us know what your after them for too, and what results you get,.......
:)
im not even sure either are of the correct Cam type...
as theres business logistics type international company called CamTech too so thats not a help..hahaha..
lets us know what your after them for too, and what results you get,.......
:)
Re: camtech
The Chipping North address is where they re-done my camshaft. Had to build up 2 lobes and re-ground the rest. $460 Sounds like someone in Brisbane is doing them a lot cheaper, address has been on here recently. SEARCH if you need it
Re: camtech
[quote author=Colza link=board=GEN;num=1095239635;start=0#3 date=09/16/04 at 13:18:37]Flaming the hell out of someone who has done something a little silly is NOT what we generally do on this forum. Smithy pointed out the error in his ways, and unless he does it again, there it stays. Give him a break guys.[/quote]
I've deleted the posts in relation to this...
I've deleted the posts in relation to this...
Re: camtech
hay its cool i found the place. thay can do a stage 1 cam for the little beast for $200 not bad they just got to check my cam out befor they start, thats what they said
-
- Forum Addict
- Posts: 589
- Joined: Tue Jan 07, 2003 9:57 pm
- Location: Manly West, Brisbane, Queensland
Re: camtech
hey so asking others on here who have cam work?!
is this a good price?!
???
Jay do you have any other work on your car done!?
A cam would probably benefit more if its gots exhaust
or whatever so its breaths easier too... right!?
is the cvcc Cam a seperate cam altogether~?
im a little vague on the cam and cvcc info. If yes
hows it driven? :-[
is this a good price?!
???
![Wink ;)](./images/smilies/icon_wink.gif)
Jay do you have any other work on your car done!?
A cam would probably benefit more if its gots exhaust
or whatever so its breaths easier too... right!?
![Razz :P](./images/smilies/icon_razz.gif)
is the cvcc Cam a seperate cam altogether~?
im a little vague on the cam and cvcc info. If yes
hows it driven? :-[
Re: camtech
Same cam just a separate set of smaller lobes in between the larger inlet and exhaust lobes.
Re: camtech
yes i have done a little bit of work, like 3 inch dump pipe, pod air filter, VN V8 fule pump battery in the boot. my engin is in peaces at the moment head just got ported and polished i will be getting a stage 1 cam grind, looking for some bigger injectors and hopeing to do a turbo upgrade plus other bits and peaces
Who is online
Users browsing this forum: No registered users and 94 guests