distributor cap problem... where to get one

Post whatever you like in here but try to keep it Honda City related!
Coops
Forum Participant
Posts: 18
Joined: Fri Aug 05, 2011 4:37 pm
Location: Gold Coast Qld, Australia

distributor cap problem... where to get one

Postby Coops » Mon Feb 06, 2012 1:19 pm

hey guys,

i have the VF city pro T and cant seem to get the dizzy cap anywhere, i can get the civic one (which bosch says is the right one) but it doesnt have the straight cutout bit,

any ideas on where to get the dizzy cap from, the one i have is shagged

thanks
Chris

User avatar
ProT
Donating Member
Posts: 203
Joined: Mon Mar 29, 2004 7:40 pm
Location: Sydney

Postby ProT » Mon Feb 06, 2012 10:13 pm

I know the picture is not correct ...

http://www.ebay.com.au/itm/220755731613 ... 1423.l2649

Would it be the correct one based on the Technical Information they have provided?

I see they they do & don't post to Australia? Best to contact them I think.

User avatar
twin_c's
Forum Participant
Posts: 44
Joined: Mon Aug 08, 2011 9:07 pm
Location: Browns plains, Queensland
Contact:

Postby twin_c's » Tue Feb 07, 2012 4:46 pm

ProT wrote:I know the picture is not correct ...

http://www.ebay.com.au/itm/220755731613 ... 1423.l2649

Would it be the correct one based on the Technical Information they have provided?

I see they they do & don't post to Australia? Best to contact them I think.


pro t the pic is correct for the na's but be careful the early civics have a similar configuration with different phasing of the rotor. this is my problem I can get the right shaped cap but it fires before the leading edge of the rotor

Coops
Forum Participant
Posts: 18
Joined: Fri Aug 05, 2011 4:37 pm
Location: Gold Coast Qld, Australia

Postby Coops » Tue Feb 07, 2012 4:56 pm

twin_c's wrote:
ProT wrote:I know the picture is not correct ...

http://www.ebay.com.au/itm/220755731613 ... 1423.l2649

Would it be the correct one based on the Technical Information they have provided?

I see they they do & don't post to Australia? Best to contact them I think.


pro t the pic is correct for the na's but be careful the early civics have a similar configuration with different phasing of the rotor. this is my problem I can get the right shaped cap but it fires before the leading edge of the rotor


have you tried the cap from that ebay seller? i saw that just after i posted

Motocompo
I'm New Here, Please Be Nice!
Posts: 2
Joined: Fri Jul 21, 2017 9:11 pm

Re: distributor cap problem... where to get one

Postby Motocompo » Sat Jul 22, 2017 9:09 pm

Dredging this thread up from the dead.... I have had huge issues buying a cap for my City. It would seem that the OP had the same issues. I bought a Bosch GH628 which is the correct shape but the wrong phase.

I spent literally 10hrs at my local parts stores and on google... I eventually tracked down the correct cap overseas in the Netherlands. They had only one left and after all the bank fees and postage, it cost me $64. I just bought it today.

To help others in the future i'll post the details of the correct cap here. I believe it's made by Facet and part code 2.7945
Websites where i've seen this cap...
http://www.egbersbeek.nl/stroomverdeler ... 27945.html
http://www.niparts.com/MAC/71BE90/FACET/27945.html

Comparative numbers:
Facet: 2.7945
BREMI: 6507
Honda part number: 30102-PA6-921

Good luck to everyone else who needs one.

User avatar
blitza
Forum Regular
Posts: 69
Joined: Fri Dec 06, 2013 12:39 pm
Location: Pukekohe, Auckland
Contact:

Re: distributor cap problem... where to get one

Postby blitza » Sun Jul 30, 2017 9:54 am

if it's the wrong phase, can't you move the plug leads?

KingCity
Forum Enthusiast
Posts: 246
Joined: Wed Aug 18, 2010 9:08 pm
Location: Waipukurau, New Zealand

Re: distributor cap problem... where to get one

Postby KingCity » Sun Aug 13, 2017 7:07 pm

blitza wrote:if it's the wrong phase, can't you move the plug leads?


I believe he is meaning that the position of the pickup points is different to the standard cap (a few mm to early or late) which will effect timing dramatically, not the firing order 1,3,4,2. And at a guess there isn't enough slot to allow the dizzy to be rotated enough to correct the timing issue, you could however (NOT RECOMMENDED) move the dizzy a tooth either way to allow the slot to be in the right place but i would not do that with a Turbo City as you're likely to run into issues with the cam/crank position sensor timing.


Return to “General”

Who is online

Users browsing this forum: Google [Bot] and 17 guests