hey
how hard would it be to get a t2 up and running in this body or am i better with option 2?
thanks alot!!
http://www.trademe.co.nz/Browse/Listing ... =714368726
http://www.trademe.co.nz/Browse/Listing ... =712467075
would a t2 engine go in here?
-
- Forum Regular
- Posts: 54
- Joined: Mon Jul 22, 2013 9:18 am
-
- Moderator / Donating Member
- Posts: 1217
- Joined: Sat Feb 21, 2004 9:31 am
- Location: Christchurch, New Zealand
Re: would a t2 engine go in here?
dionallott123 wrote:hey
how hard would it be to get a t2 up and running in this body or am i better with option 2?
thanks alot!!
http://www.trademe.co.nz/Browse/Listing ... =714368726
http://www.trademe.co.nz/Browse/Listing ... =712467075
Option 1: Very hard, different model, different engine etc.
Option 2: Doable, requires using loom, also would have to sort out drive shafts as the T2 runs a slightly wider gearbox which pushes the shafts out (t2 came with wider front track)
Easier would be T1 engine with gearbox, almost a straight drop in, or you could put T1 gearbox on T2 engine, requires flywheel swapped over.
Re: would a t2 engine go in here?
Or buy a t2
-
- Forum Regular
- Posts: 54
- Joined: Mon Jul 22, 2013 9:18 am
Re: would a t2 engine go in here?
i got a t2 but its crashed :/ need a donor body
-
- Forum Regular
- Posts: 54
- Joined: Mon Jul 22, 2013 9:18 am
Re: would a t2 engine go in here?
have like 100 spares and good running engine.. dont want to scrap it .. hows the transfer into a t1? o
-
- Forum Regular
- Posts: 54
- Joined: Mon Jul 22, 2013 9:18 am
Re: would a t2 engine go in here?
i have all running gear and looms ecu etc for t2 and i have no t1 parts.. just wanting to see my options was getting to 100 well under 7 seconds for sure with a few mods -
Who is online
Users browsing this forum: No registered users and 56 guests